6 Channel Digital Servo Tester

    Dimension : 76mm*53mm(2.99in*2.09in)

    Weight: 37g (1.31oz)

    Use high-precision six potentiometersHave over-current protection

    Have over-current protection



  • Use high-precision six potentiometers, which can control the corresponding six servos simultaneously

  • The 0th, 1st, 2nd and 3rd interface have over-current protection to avoid burning out servo due to over-current

  • The voltage that the controller require should correspond to the voltage required by a servo that you controlled

  • There is a small button under each knob of controller, press it, the servo will return to the center of the state, the knob can not control the servo rotation; then press it, remove the center of the state, the knob can continue to control the servo rotation





Parameter:
Dimension : 76mm*53mm(2.99in*2.09in)
Weight: 37g (1.31oz)

Wiring Instruction
+: connect 5-8.4v power supply
—:connect the power supply negative
The  voltage that the tester require should correspond to the voltage required by a servo that you controlled

Package Content:
1 x Servo Tester

    Copyright © 2017 www.lobot-robot.com LewanSoul All Rights Reserved