LeHand

    1.The glove was developed on the basis of the Arduino UNO controller and equipped with five sliding resistors for sensing the movement of the fingers.

    2.Equipped with a gyroscope and a tilt sensor for detecting the movement status of the entire palm.

    3.The communication uses the HC-08 Bluetooth module.



Our glove was developed on the basis of the Arduino UNO controller and equipped with five sliding resistors for sensing the movement of the fingers. They are equipped with a gyroscope and a tilt sensor for detecting the movement status of the entire palm. The communication uses the HC-08 Bluetooth module based on the Bluetooth 4.0 protocol, which can achieve master-slave communication with the corresponding HC-08 Bluetooth module and perform signal transmission and communication quickly.


392dd664b245d670948b8a96bd4a4d0f.jpg



Built-in Bluetooth and compass acceleration sensor

61db8e64ee7e75ca019ddf5d49a21873.png

Application

20180608\e1077df137759f7c7af1828e1568b6f2.png


Bionic robot hand uHand

0d0b154dfb38e824822b46abcfec93fd.png


CR-6 six foot spider robot 


44f2849f871f77b526843ee872072bd2.png

LeArm mechanical arm

51f2d245681e7cdce1ab1be29943b78a.png


Tracking robot

10ec0ced33f3b8023b0ef02ef25a3312.png

Product List

0b64bc06036d51b44b3786a4fcfac570.png

62cbe310fd472b5b5883224989352ceb.jpg

    Copyright © 2017 www.lobot-robot.com LewanSoul All Rights Reserved